How To Clean Ninja Blender Lid that Truly works?
Blender- the most related tool that always keeps the kitchen busy!
Don’t even try to deny it.
No matter what the food is cooking, a blender is essential for every little mash, blend, juice, or any other things!
If you have a Ninja blender, you can relax to get more efficient uses than any other blender.
Now, here is the pain……..
Cleaning, especially the lid!
Do you clean the ninja blender regularly after use? If so, then probably one of those who are struggling to figure out how do you clean the ninja blender lid.
Am I right?
No worry. If you don’t know how to clean ninja blender lid, this article is for you. Without further ado, let’s know the details. Read more.
- 1 How To Clean Ninja Blender Lid (7 Steps to Make Cleaning a little easier)
- 1.1 Are Ninja blenders easy to clean?
- 1.2 How do I get the smell out of my ninja blender?
How To Clean Ninja Blender Lid (7 Steps to Make Cleaning a little easier)
The cleaning blender will always prepare for making the work earlier and suitable for family members’ health.
No doubt about it!
So, to ensure the proper maintenance and long-lasting use, you need to do an immediate clean after every use.
Most people make the same mistake of not washing the blender immediately. As a result, day by day, it becomes full of more dirt and stuck to hard things.
That’s why this difficulty turned around being proper washes of a blender. In most cases, it has seen more complex issues to clean the ninja blender lid than any other parts.
So, how do I clean the lid of my ninja blender?
The lid should be cleaned by soaking the lid into the water for 5-10 minutes. Then it would be best if you rubbed the inside and outside with some warm soapy water & carefully next scrubbing it to get rid of the remaining old particles with a toothbrush. Now allow the lid to rinse with tap water. And make the lid completely dry before reinstalling it in the blender.
Still didn’t get the process? Don’t worry; I made a step-by-step guide (which saves a hell of a lot of time) for you.
So, let’s jump to the process of how to clean ninja master prep lid.
Step 1: Know your blender lid
First things to know about the blender lid parts! This is one of the hacks to get the proper cleaning of your blender lid.
As you you can see…………
The blender lid is standing at the top of your jar, allowing you to operate the blender safely. And also help to blend without exploding ingredients from the jar.
Lids generally come in glass or plastic, or rubber. Many lids are consisting of two different parts. Though opening the Ninja lid is a bit different from the rest of the others. Remove the lid by pressing the relese button.
Step 2: Gather the necessary tools
You have the necessary tools to help one’s to prevent a mess in the working process. Also, it is completely saving your time and effort.
There are a few methods of cleaning blender lids with different tools. So, the list of devices depends on the various techniques and lids. The necessary tools are listed here-
- Baking soda
- A sponge
- Mild dish soap cleanser
Step 3: Unplug the machine
Now, the primary working process begins from here. After uses, cleaning is essential. But not so much in a hurry that you forget to unplug the ninja blender from the socket.
So, you must have to switch off the blender machine and remove the plug from the socket. Otherwise, it might cause a short electrical shock to your body.
Step 4: Rinse it
This is the first method applying immediately after use for the easy washing of lids! You’ve to fill up the ninja blender half with hot water. After that, add a few drops of dish detergent. Set the low power of a blender and turn it on.
Wait for a minute. Pour the mixture and rinse it again with water. It’ll help clean the whole blender and the lid to get out of remains dirty.
The second method is to wash with lemon. The method is to clean more dirt that can’t get out with the help of dish detergent.
It’s also the same as the first method. All you need is hot water and add a few drops of dish detergent and lemon juice.
Next, turn the blender with a low power setting and rinse it again with the same process. It’ll be practical to wash your dirty blender lid in a minute.
Step 5: Disassemble the blender
The upper steps are for just a simple wash to clean your blender lid with other parts. It’s just for an immediate clean of your new blender lid.
Now, unplug the machine from the socket early and disassemble the blender parts carefully. Take off the lid from the ninja blender and take it apart for the single wash.
Step 6: Time to Clean the lid
Now, you’ve to clean the lid carefully. How to get the lid off a ninja blender?
If your ninja blender lid consists of two parts, then you’ve to separate them first. And next, prepare them for an individual wash.
Look at your lid; here you must see the rubber gasket attached to it. In most cases, people can easily clean the lid in water or dish detergent without the rubber inside it.
You don’t even guess how much the rubber is getting dirty over a week or month. And this is also stuck with the hard things such as old food particles that are difficult to remove.
Thus, for cleaning purposes, you’ll need a medium bristled toothbrush or a non-abrasive scrubber.
Like other parts of the blending machine, lids may have dried residue. And it’s pretty normal actually. After that, rewash the lid with running water. Here, you get a completely clean lid.
Step 7: Allow the blender lid to dry
The last one thing you might have followed to complete the project.
Yeah, finish the process by allowing the lid to air dry in a dry rack.
Never reassemble the lids to the jar or a blender parts immediately after wash. The remaining moisture can cause possible bacteria growth.
So, must be aware of drying the lid until there is any moisture left. Thus, the cleaning of the ninja blender lid ends perfectly. I learn these tricks from Kitchen Tribune and these are super effective.
Are Ninja blenders easy to clean?
Ninja blenders designs ensure you get efficient work as well as easy clean. Here, the parts are easy to unscrew, and they are dishwasher safe also. You can easily clean the ninja blender jar with a dish detergent, lemon pieces, or vinegar.
There are a few easy methods to clean your blender. Thus, immediate cleaning after every use will boost the lasting period and efficiency of your ninja blender.
How long should a Ninja Blender last?
As we know, every electrical machine is coming with a warranty. So, if you directly make sure of the lasting time, then 365 days is just a day of warranty.
The proper use and maintenance will decide how long the ninja blender will last. Knowing how to clean nutri ninja blender base & pitcher is not only important; take care of the lid is also important. Somewhere, the ninja blender only lasts one month only just because of heavy use. So, however, it depends on your blender care and maintenance.
The main theme is to rinse it with hot water, next scrubbing it to get rid of remaining old particles with a toothbrush. After that, rinse it again with cleaning water.
How do I get the smell out of my ninja blender?
Cut a lemon into pieces. Then put it on a blender with a cup of water. Next, blend it with a low adjusting power for a minute. After that, again, you need to wash it with clean water.
The lemon will effectively work on getting the smell out of my ninja blender.
Are ninja blenders dangerous?
Ninja Blenders can be dangerous as they consist of sharp blades and cutting edges. So, you have to touch them carefully while you are separate or cleaning them.
Here you go!
You already know how to take apart ninja blender to clean & the full process of How to clean Ninja Personal blender.
Whether the cleaning of a ninja blender is quite tricky and takes more time, it also seems boring. But, for better performance and better health, you must have to clean your ninja blender along with the blender lid after use immediately.
Last update on 2022-01-22 at 14:04 / Affiliate links / Images from Amazon Product Advertising API